Taian Taishan Jinshi Machine Co., Ltd.
Main products:fuel injection pump test bench,gas meter,spare parts of test bench
Products
Contact Us
  • Contact Person : Ms. chang wenbin
  • Company Name : Taian Taishan Jinshi Machine Co., Ltd.
  • Tel : 0086-538-8560918
  • Fax : 0086-538-8560918
  • Address : Shandong,Taian,Middle Part of Chuangye Road, Qingchun Chuangye Development Zone
  • Country/Region : China
  • Zip : 271021

Products List
Gas meter

Gas meter

1.Specification:JR1.6 JR2.5 2.Thread Size:30*2mm 3Table Connector:4 in charge of the child 4Table Connector Material:Copper GAS METER Structure1.Casting aluminum shell, reliable anti-reverse-rotation device, small size, light weight, high strength, corrosion resistance,...
PJ-60 Nozzle tester

PJ-60 Nozzle tester

1.nozzle tester 2.test bench 3.high qulity 4.hot PJ-60 Nozzle tester Nozzle tester is used to calibrate the injection pressure, fuel atomization, injection angle and tightness of the needle valve lf the diesel injector assembly to ensure good power performance and engine...
PTQL Injector Calibration Stand

PTQL Injector Calibration Stand

PTQL Injector Calibration Stand is used to measure fuel injection volume for the various models in the some cycles. PTQL Injector Calibration Stand is used to measure fuel injection volume for the various models in the some cycles. Fuel injection volume is displayed with numerical...
CRIS-1 common rail injector test stand

CRIS-1 common rail injector test stand

1.Bosch cp1/cp3 pump 2.OTS inverter 3.testing more than 600 injectors 4.stable performance 5.47 year's product tester CRIS-1 common rail injector test bench CRIS-1 high pressure common rail injector test bench is based on the diesel engine ECU, also provides control...
CRSS-B common rail system test bench --NEW PRODUCT

CRSS-B common rail system test bench --NEW PRODUCT

1.40-year's history experience 2.new product 3.high quality and cheap 4.1 year service CRSS-B COMMON RAIL SYSTEM TEST BENCH  FUNCTIONS        1, support high-speed solenoid valve common-rail injector, and supports third-generation...
CRSS-C common rail system test bench

CRSS-C common rail system test bench

1.46 year's history product test bench 2.220V/380V 50HZ 3Phase-4Wire 3.high quality 4.cheap CRSS-C COMMON RAIL SYSTEM TEST BENCH BrieflyCRSS-C common rail injector test bench is based on the diesel engine ECU, also provides control signal of common rail system of Bosch,...
CR pump test bench

CR pump test bench

1. Test the performance of CR pump 2. test the electromagnetic valve performance of CR pump.  Main function :1. Test the performance of CR pump 2. test the electromagnetic valve performance of CR pump.3. test the performanc of low pressure oil transfer pump 4. Injector...
Gold testing machine

Gold testing machine

1.Bosch CP3 pump 2.test common rail injector 3.test about 600 kinds of injectors 4.Have Bosch Denso Delphi Siemens data CRIS-1 common rail injector test bench--stable performance Main Technical Data: ModelCRIS-1Rotating speed range of main shaft (rpm)0~3000Rotation direction...
IC card gas meter

IC card gas meter

Has two sets of display system, wheeled mechanicaldisplay and liquid crystal display with controller microcomputer.  Main technical parameters and characteristics: 1. JRB1.6, JRB2.5-type gas meter, the largest flow is 2.5m3 / h, the maximum working pressure of 10kPa. 2....
Standard fuel injector

Standard fuel injector

1.Standard fuel injector 2.high qulity and cheap Standard fuel injector Injection pump test stand with standard fuel injection assembly is a key component of the test rig, it is mainly used for testing and adjustment of the diesel engine fuel pump assembly, the accuracy of a...


Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.